加工定制: 是 |
GCS型低壓抽出式開關柜(以下簡稱裝置)廠家生產
是兩部聯合設計組根據行業主管部門、廣大電力用戶及設計單位的要求設計研制出的符合國情、具有較高技術性能指標、能夠適應電力市場發展需要并可與現有引進產品競爭的低壓抽出式開關柜,該裝置已被電力用戶廣泛選用。
裝置適用于發電廠、石油、化工、冶金、紡織、高層建筑等行業的配電系統。在大型發電廠、石化系統等自動化程度高,要求與計算機接口的場所,作為三相交流頻率為50(60)Hz、額定工作電壓為380V(400)V、(600)V,額定電流為4000A及以下的發、供電系統中的配電、電動機集中控制、無功功率補償使用的低壓成套配電裝置。
結構特點
1 提高轉接件的熱容量,較大幅度的降低由于轉接件的溫升給接插件、電纜頭、間隔板帶來的附加溫升。
2 功能單元之間、隔室之間的分隔清晰、可靠,不因某一單元的故障而影響其他單元工作,使故障局限在最小范圍。
3 母線平置式排列使裝置的動、熱穩定性好,能承受80/176kA短路電流的沖擊。
4 MCC柜單柜的回路數量多到22回,充分考慮大單機容量發電,石化系統等行業自動化電動門(機)群的需要。
5 裝置與外部電纜的連接在帶電纜隔室中完成,電纜可以上下進出。零序電流互感器置于電纜隔室內,使安裝維修方便。
6 同一電源配電系統,可以通過限流電抗器匹配限制短路電流,穩定母線電壓在一定的數值,還可部分降低對元器件短路強度的要求。
7 抽屜單元有足夠數量的二次插插件(1單元及以上為32對,1/2單元為20對)??蓾M(mǎn)足計算機接口和自控回路對接點數量的要求。
使用環境
1 周?chē)諝鉁囟炔桓哂?40°C,不低于-5°C。24小時內平均溫度不得高于+35°C。 超過時,需根據實際情況降容運行。
2 戶內使用,使用地點地海拔高度不得超過2000m。
3 周?chē)諝庀鄬穸仍谧罡邷囟葹?40°C時不超過50%,在較低溫度時允許有較大的相對濕度:如+20°C是為90%,應考慮到由于溫度的變化可能會(huì )偶然產生凝露的影響。
4 裝置安裝時與垂直面的傾斜度不超過5°,且整組柜列相對平整(符合GBJ232-82標準)。
5 裝置應安裝在無劇烈震動和沖擊以及不足以使電器元件受到不應有的腐蝕的場所。
武漢電無憂電氣有限公司 手機:18607183252 電話:400-0803252 地址:武漢市東西湖區革新大道萬安科技產業基地1棟
武漢電無憂電氣有限公司